CADDX NX8EUA01 Bedienungsanleitung PDF herunterladen (Seite 13)

RESET FUNCTION

This function is used to reset Smoke Detectors, Zone Troubles, and Zone

Tampers.

Step 1 Disarm the system if not disarmed.

Step 2 Press [

]-[7]. Resets have now been performed.

Step 3 If the keypad begins beeping, the reset did not execute properly.

Enter your code to silence the keypad. Wait a few minutes and

repeat step 2 to attempt another reset. If the keypad still beeps after

repeated attempts, please contact your installer.

SET SYSTEM DATE

Step 1 Press the [

]-[9]-[6].

Step 2 Enter the “Master Code”.

Step 3 Enter the “Day of Week “

1 = Sunday 3 = Tuesday 5 = Thursday 7 = Saturday

2 = Monday 4 = Wednesday 6 = Friday

Step 4 Enter the “Month Code”. Must always be two (2) digits.

01 = January 05 = May 09 = September

02 = February 06 = June 10 = October

03 = March 07 = July 11 = November

04 = April 08 = August 12 = December

Step 5 Enter the “Day Code”. Must always be two (2) digits.

Example: The 5

would be entered as [0]–[5].

Step 6 Enter the last two digits of the “Year Code”.

Example: For 1997 enter [9]–[7].

SETTING THE SYSTEM CLOCK

Step 1 Press [

]-[9]-[7].

Step 2 Enter the “Master Code “.

Step 3 Enter the “hour code” which must be two (2) digits. Note: The clock

is a 24-hour clock. Refer to the following table on page 14.

Step 4 Enter the “minutes code” which must be two (2) digits.

Example: 7 minutes after would be entered [0]–[7].

1 2 ... 8 9 10 11 12 13 14 15 16 17 18

Keine Kommentare

CADDX NX8EUA01 Bedienungsanleitung Seite 13