CADDX NX-448E-I Installationshandbuch Seite 39
- Seite / 94
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
GE Security
g
Special formats
LOCATION 18 - CUSTOM COMMUNICATOR FORMAT (see locations 2, 8, and 14)
Segment 1
1 = On for 1800hz transmit; Off for 1900hz
2 = On for 2300hz handshake; Off for 1400hz
3 = On for checksum parity; Off for double round parity
4 = On for 2 digit event code; Off for 1 digit event code
5 = On for extended reporting; Off for non-extended reporting
6 = Reserved
7 = On for 20 PPS; Off for 10 or 40 PPS
8 = On for 10 PPS; Off for 20 or 40 PPS
Segment 2
1 = On for pager format (no handshake required).
2 = On for 1400/2300 handshake
3 = Reserved
4 = Reserved
5 = On for Contact ID
6 = On for SIA
7 = On for 3 digit event code
8 = On for DTMF
Segment 3
Reserved
Segment 4
Inter-digit time for pulse format:
The inter-digit time is the value programmed on this location, divided by
the pulse-rate (PPS) of the programmed format. This is programmed in a
binary way: in order to program the value “10”, options 2 and 4 must be
selected, for value “5”, options 1 and 3 must be selected.
Ex: when the value 10 is programmed on segment 4 and a pulse format
of 20 PPS is used, the inter-digit time is 10/20 = 0.5 sec.
NX-4-EUR Installation manual Page 39 08/09/04
- Series 1
- NX-4-EUR Control Panel 1
- Installation manual 1
- CONTENTS 2
- GENERAL INFORMATION 4
- ORDERING INFORMATION 4
- FEATURE DEFINITIONS 5
- GE Security 10
- PROGRAMMING THE NX-4 KEYPADS 12
- IMPORTANT REMARKS 31
- Telephone number 1 32
- Format selections 33
- Telephone number 2 35
- Telephone number 3 37
- Special formats 39
- Download parameters 40
- Entry/Exit timers 42
- General options 46
- Programming the outputs 50
- NX-4 PROGRAMMING WORKSHEETS 71
- BOARD INSTALLATION 80
- NX-4 WIRING DIAGRAM 81
- TERMINAL DESCRIPTION 82
- TECHNICAL SPECIFICATIONS 83
- CONTACT-ID AND SIA 85
- CONTACT ID 87
- EXPANDER TROUBLE 89
- CE DECLARATION 90
Verwandte Produkte und Handbücher für Empfänger CADDX NX-448E-I
Empfänger CADDX NX-408E-I Installationshandbuch
(99 Seiten)
(99 Seiten)
Empfänger CADDX NX-408E-I Spezifikationen
(16 Seiten)
(16 Seiten)
Empfänger CADDX NX-408E Spezifikationen
(16 Seiten)
(16 Seiten)
Empfänger CADDX NX-448E-I Spezifikationen
(30 Seiten)
(30 Seiten)
Empfänger CADDX NX-448E-I Installationshandbuch
(61 Seiten)
(61 Seiten)
Microtek Adapter für die Scannertransparenz Benutzerhandbücher
Beginnend mit S
Kommentare zu diesen Handbüchern